Introduzione

This guide will show how to fix squeaky parts on the wheelchair.

Strumenti

Parti

Nessuna parte richiesta.

Locate the source of the squeaking. Typically, this will be one of the rear wheels, castor wheels, or brakes. Clean and remove any dirt or rust from the source of the squeaking.
  • Locate the source of the squeaking.

  • Typically, this will be one of the rear wheels, castor wheels, or brakes.

  • Clean and remove any dirt or rust from the source of the squeaking.

  • You may need to partially disassemble the squeaky part in order to thoroughly clean it.

Aggiungi Commento

Check for improper assembly.
  • Check for improper assembly.

  • Refer to the teardown to check that the wheelchair is properly assembled.

  • Check for proper lubrication. If not lubricated, lubricate thoroughly with bike grease.

Aggiungi Commento

Roll the wheelchair around to check if the squeaking has stopped.
  • Roll the wheelchair around to check if the squeaking has stopped.

  • If the squeaking still continues, recheck the chair until the problem is fixed.

Aggiungi Commento

Conclusione

Squeaking can be caused by overly tightened connections. If problem still occurs after going through steps, try to slightly loosen bolts (half a turn of the wrench) near the source of squeaking.

Un'altra persona ha completato questa guida.

Kali Slaughter

Membro da: 19/04/2013

207 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 14-8, Maness Spring 2013 Membro di Cal Poly, Team 14-8, Maness Spring 2013

CPSU-MANESS-S13S14G8

5 Membri

7 Guide realizzate

A quick spray of Extralube C60 Trigger Spray will keep the components rust free and spinning for much longer... worth a go www.team-zx1.com

sandraphleb - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 38

Tutti i Tempi: 1,525