Introduzione

Use this guide to repair the power supply with a Phillips head screwdriver, a wrench, and pliers. These tools will help secure the screw holding the wire.

First, to remove the plastic bracket, turn toaster oven on its side.
  • First, to remove the plastic bracket, turn toaster oven on its side.

Aggiungi Commento

Use Phillips head screwdriver and wrench to remove screw and nut securing the plastic bracket.
  • Use Phillips head screwdriver and wrench to remove screw and nut securing the plastic bracket.

Aggiungi Commento

Use Phillips head screwdriver and pliers to remove screw and nut securing transformer.
  • Use Phillips head screwdriver and pliers to remove screw and nut securing transformer.

Aggiungi Commento

If the wire gets pulled out of the transformer, reinsert it.
  • If the wire gets pulled out of the transformer, reinsert it.

  • Use a small flathead screwdriver to secure the screw that holds the wire in place.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Tony Wang

Membro da: 05/10/2012

64 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 6-35, Regan Fall 2012 Membro di Cal Poly, Team 6-35, Regan Fall 2012

CPSU-REGAN-F12S6G35

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 668