Introduzione

Over time debris can build up on the print head nozzle causing irregular flow resulting in poor print quality.

Parti

Nessuna parte richiesta.

The printer needs to be on in order to change the ink cartridges.
  • The printer needs to be on in order to change the ink cartridges.

Aggiungi Commento

To locate the ink cartridges the paper output tray must be in the lowered position. Next lift the scanning unit until the scanning support is vertical. Lower the scanning unit until the scanning unit support seats in the scanning unit support slot.
  • To locate the ink cartridges the paper output tray must be in the lowered position.

  • Next lift the scanning unit until the scanning support is vertical.

  • Lower the scanning unit until the scanning unit support seats in the scanning unit support slot.

Aggiungi Commento

Allow the printer to position the ink cartridge carrier into the ink cartridge removal location. Before replacing the ink cartridge ensure the correct ink cartridge is installed. Push down on the front edge of the ink cartridge.
  • Allow the printer to position the ink cartridge carrier into the ink cartridge removal location.

    • Before replacing the ink cartridge ensure the correct ink cartridge is installed.

  • Push down on the front edge of the ink cartridge.

    • Observe the angle at which the ink cartridge is removed.

  • Grasp ink cartridge and pull up and out to remove.

Aggiungi Commento

Hold the ink cartridge with the ink nozzle facing up. Using a paper towel firmly wipe the entire ink nozzle. Repeat until the nozzle appears free of any ink and debris. Repeat until the nozzle appears free of any ink and debris.
  • Hold the ink cartridge with the ink nozzle facing up. Using a paper towel firmly wipe the entire ink nozzle.

    • Repeat until the nozzle appears free of any ink and debris.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Garret Wescott

Membro da: 23/10/2014

591 Reputazione

4 Guide realizzate

Team

Michigan Tech, Team 1-5, Lauer Fall 2014 Membro di Michigan Tech, Team 1-5, Lauer Fall 2014

MTU-LAUER-F14S1G5

3 Membri

5 Guide realizzate

is ther an easy way to gain access to the roller at the rear of the machine to clean it

hope342 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 70

Tutti i Tempi: 2,130