Introduzione

Use this guide to replace the Touch Screen.

Remove the outer screen cover by releasing  the top clip from the main body of the device. Remove the outer screen cover by releasing  the top clip from the main body of the device.
  • Remove the outer screen cover by releasing the top clip from the main body of the device.

Aggiungi Commento

Pull out the stylus from the top right corner of the device. Pull out the stylus from the top right corner of the device. Pull out the stylus from the top right corner of the device.
  • Pull out the stylus from the top right corner of the device.

Aggiungi Commento

Slide the memory cartridge cover up and off the device. Slide the memory cartridge cover up and off the device. Slide the memory cartridge cover up and off the device.
  • Slide the memory cartridge cover up and off the device.

Aggiungi Commento

Remove the battery cover by releasing the clip from the main body of the device. Remove the battery cover by releasing the clip from the main body of the device.
  • Remove the battery cover by releasing the clip from the main body of the device.

Aggiungi Commento

Remove the batteries from the device.
  • Remove the batteries from the device.

Aggiungi Commento

Unscrew the four 2.94mm screws with a #00 Phillips screwdriver.
  • Unscrew the four 2.94mm screws with a #00 Phillips screwdriver.

  • One end of the OEM stylus can unscrew and contains a mini #00 Phillips screwdriver.

Aggiungi Commento

Use the spudger to pry open the casing by applying pressure at 4 clips on both sides of the device. Be careful while opening the casing as there is a flex strip connecting the two halves. Be careful while opening the casing as there is a flex strip connecting the two halves.
  • Use the spudger to pry open the casing by applying pressure at 4 clips on both sides of the device.

  • Be careful while opening the casing as there is a flex strip connecting the two halves.

Aggiungi Commento

Disconnect the flex strip from the motherboard with tweezers. Disconnect the flex strip from the motherboard with tweezers. Disconnect the flex strip from the motherboard with tweezers.
  • Disconnect the flex strip from the motherboard with tweezers.

Aggiungi Commento

Release the latch in bottom right corner of the touchscreen. Use the spudger (if needed) to pry the screen from the front case. Use the spudger (if needed) to pry the screen from the front case.
  • Release the latch in bottom right corner of the touchscreen.

  • Use the spudger (if needed) to pry the screen from the front case.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

David Faltemier

Membro da: 20/06/2012

19 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 1-2, Regan SU 2012 Membro di Cal Poly, Team 1-2, Regan SU 2012

CPSU-REGAN-SU12S1G2

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 508