Introduzione

Sometime as part of your device malfunctioned and you would like to replace the part by yourself, this is where this guide come in handy.

Parti

Nessuna parte richiesta.

Gently press on back plate, push toward camera direction. Gently press on back plate, push toward camera direction.
  • Gently press on back plate, push toward camera direction.

Aggiungi Commento

Use finger to lift up an edge of battery. Use finger to lift up an edge of battery.
  • Use finger to lift up an edge of battery.

Aggiungi Commento

Remove 4 screws circled in red using T6 screw driver.
  • Remove 4 screws circled in red using T6 screw driver.

Aggiungi Commento

Lift plastic cover near Memory card slot. Lift plastic cover near Memory card slot.
  • Lift plastic cover near Memory card slot.

Aggiungi Commento

Remove two Phillips #00 screws from the backside of the screen.
  • Remove two Phillips #00 screws from the backside of the screen.

Aggiungi Commento

Insert a spudger or plastic opening tool into the seam on the side of the phone. Gently pry apart the two halves of the phone.
  • Insert a spudger or plastic opening tool into the seam on the side of the phone.

  • Gently pry apart the two halves of the phone.

  • Work your way around the phone until the two halves separate.

Aggiungi Commento

Gently unplug connectors marked with blue rectangle. Remove screws circled in red with 00 Phillip screw driver.
  • Gently unplug connectors marked with blue rectangle.

  • Remove screws circled in red with 00 Phillip screw driver.

Which screws in red? There aren't any.

Calion - Replica

They are marked up in red in the second picture.

Jake Devincenzi -

Gently lift logic board using plastic opener tool. Be aware of antenna
  • Gently lift logic board using plastic opener tool.

  • Be aware of antenna

Aggiungi Commento

Remove 4 screws circled in red using 00 Phillip screw driver. Remove 4 screws circled in red using 00 Phillip screw driver.
  • Remove 4 screws circled in red using 00 Phillip screw driver.

Aggiungi Commento

Lift back plate of screen using finger or plastic opener tool Lift back plate of screen using finger or plastic opener tool
  • Lift back plate of screen using finger or plastic opener tool

Aggiungi Commento

Gently lift conncetors marked with blue rectangles.
  • Gently lift conncetors marked with blue rectangles.

  • Remove 4 screws marked in red circles using 00 philip screw driver

Aggiungi Commento

Lift front keyboard, remove screws circled in red with 00 philip screw driver
  • Lift front keyboard, remove screws circled in red with 00 philip screw driver

Aggiungi Commento

With  front keyboard removed, gently lift screen with plastic opener tool. With  front keyboard removed, gently lift screen with plastic opener tool. With  front keyboard removed, gently lift screen with plastic opener tool.
  • With front keyboard removed, gently lift screen with plastic opener tool.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Zhaowei Zhang

Membro da: 28/04/2011

112 Reputazione

4 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 3,372