Parti

Nessuna parte richiesta.

Flip the phone over to have the rear cover facing up.
  • Flip the phone over to have the rear cover facing up.

    • The camera lens should be towards the top of the phone.

Aggiungi Commento

Slide the cover up, towards the top of phone, to unlock the battery cover. Lift the cover off phone and remove it.
  • Slide the cover up, towards the top of phone, to unlock the battery cover.

  • Lift the cover off phone and remove it.

Aggiungi Commento

Use your finger to push the top of the battery downwards and lift the battery out of the phone. Use your finger to push the top of the battery downwards and lift the battery out of the phone. Use your finger to push the top of the battery downwards and lift the battery out of the phone.
  • Use your finger to push the top of the battery downwards and lift the battery out of the phone.

Aggiungi Commento

Remove the six Torx #5 screws that are securing the rear frame. Remove the six Torx #5 screws that are securing the rear frame. Remove the six Torx #5 screws that are securing the rear frame.
  • Remove the six Torx #5 screws that are securing the rear frame.

Aggiungi Commento

Pry the frame open, releasing the eight plastic tabs around the edge of the frame, using the plastic opening tool. A plastic card can be used instead of the plastic opening tool. A plastic card can be used instead of the plastic opening tool.
  • Pry the frame open, releasing the eight plastic tabs around the edge of the frame, using the plastic opening tool.

    • A plastic card can be used instead of the plastic opening tool.

Aggiungi Commento

Remove the single Phillips #0 screw that is securing the motherboard to the front case of the phone. Remove the single Phillips #0 screw that is securing the motherboard to the front case of the phone.
  • Remove the single Phillips #0 screw that is securing the motherboard to the front case of the phone.

Aggiungi Commento

Pry the motherboard away from the front of the plastic case using a plastic opening tool. Be careful not to break the ribbon cable when prying away the motherboard.
  • Pry the motherboard away from the front of the plastic case using a plastic opening tool.

    • Be careful not to break the ribbon cable when prying away the motherboard.

Aggiungi Commento

Remove the plastic cover from the LCD display and the motherboard. The Motherboard and the LCD are still attached together. The Motherboard and the LCD are still attached together.
  • Remove the plastic cover from the LCD display and the motherboard.

    • The Motherboard and the LCD are still attached together.

Aggiungi Commento

Remove the gray tape securing the ribbon cable. Remove the gray tape securing the ribbon cable.
  • Remove the gray tape securing the ribbon cable.

Aggiungi Commento

Remove the yellow tape securing the connector lock.
  • Remove the yellow tape securing the connector lock.

Aggiungi Commento

Carefully lift the black lock to release the ribbon cable, using the plastic opening tool. Carefully lift the black lock to release the ribbon cable, using the plastic opening tool.
  • Carefully lift the black lock to release the ribbon cable, using the plastic opening tool.

Aggiungi Commento

Pull the ribbon cable upwards, disconnecting it from the Motherboard.
  • Pull the ribbon cable upwards, disconnecting it from the Motherboard.

Aggiungi Commento

Lift the Motherboard away from the LCD display.
  • Lift the Motherboard away from the LCD display.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Marco Jokada

Membro da: 28/04/2011

247 Reputazione

6 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 2,008