Introduzione

This guide is designed to help you out with changing the IO board. The IO board is used for charging the device, connecting the headphones, and being able to connect to the HDMI cable. If none of these are working you should consider replacing the board itself.

Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down
  • Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down

  • Remove the back cover.

Aggiungi Commento

Disconnect the battery cable from the system board
  • Disconnect the battery cable from the system board

Aggiungi Commento

Pull the yellow ribbons
  • Pull the yellow ribbons

Aggiungi Commento

Disconnect the speaker cables from the I/O board
  • Disconnect the speaker cables from the I/O board

Aggiungi Commento

Remove the two Phillips PM1.5×4.0 screws that secure the I/O board to the display panel assembly.
  • Remove the two Phillips PM1.5×4.0 screws that secure the I/O board to the display panel assembly.

Aggiungi Commento

Remove the IO board carefully.
  • Remove the IO board carefully.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Claudia

Membro da: 31/08/2014

246 Reputazione

2 Guide realizzate

Team

USF Tampa, Team 9-4, Blackwell Fall 2014 Membro di USF Tampa, Team 9-4, Blackwell Fall 2014

USFT-BLACKWELL-F14S9G4

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 666