Introduzione

If the printhead is bad, it will reflect on the quality of the printing. The printhead holds the ink and transfers characters and images tot he paper. If the printing quality is not acceptable, the printhead may need replacement.

Open the top of the printer as shown.
  • Open the top of the printer as shown.

  • Locate the ink cartridges housed by the printhead.

Aggiungi Commento

Remove each ink cartridge by pushing the tab and lifting the cartridge. Set all 5 cartridges aside.
  • Remove each ink cartridge by pushing the tab and lifting the cartridge.

  • Set all 5 cartridges aside.

Aggiungi Commento

Lift the lever located on the right side of the printhead. Lift the lever located on the right side of the printhead. Lift the lever located on the right side of the printhead.
  • Lift the lever located on the right side of the printhead.

Aggiungi Commento

Lift the printhead and remove it. Lift the printhead and remove it.
  • Lift the printhead and remove it.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Laura

Membro da: 23/10/2014

628 Reputazione

3 Guide realizzate

Team

Michigan Tech, Team 1-2, Lauer Fall 2014 Membro di Michigan Tech, Team 1-2, Lauer Fall 2014

MTU-LAUER-F14S1G2

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 18

Ultimi 30 Giorni: 56

Tutti i Tempi: 2,950