Introduzione

Many times, connecting to a wireless network can be difficult. Finding the problem that isn't allowing you to connect may be even more challenging. With help from this guide, you will be able to easily replace your laptop's wireless card.

Parti

Nessuna parte richiesta.

Turn the laptop over to expose the bottom side.
  • Turn the laptop over to expose the bottom side.

  • Locate the battery removal switch next to the battery compartment

  • Important: Before doing any repairs on the laptop, make sure it is completely powered down and unplugged.

Aggiungi Commento

Slide the switch all the way to the left to release the battery.  The battery should pop up. Lift the battery out.
  • Slide the switch all the way to the left to release the battery. The battery should pop up.

  • Lift the battery out.

Aggiungi Commento

Locate the panel that lies in the front center of the laptops underside. Using a Phillips #1 screwdriver, remove the two 5mm screws on the forward end of the cover. Lift off the cover to expose the Wi-Fi card underneath.
  • Locate the panel that lies in the front center of the laptops underside.

    • Using a Phillips #1 screwdriver, remove the two 5mm screws on the forward end of the cover.

  • Lift off the cover to expose the Wi-Fi card underneath.

Aggiungi Commento

Locate the Wi-Fi card inside of the computer. With a Phillips #1 screwdriver, remove the two 11mm screws on either side of the wires attached to the top of the Wi-Fi card. Lift the card from its resting location. Be careful, the card and attached wires are fragile.
  • Locate the Wi-Fi card inside of the computer.

  • With a Phillips #1 screwdriver, remove the two 11mm screws on either side of the wires attached to the top of the Wi-Fi card.

  • Lift the card from its resting location. Be careful, the card and attached wires are fragile.

Aggiungi Commento

Carefully pop the wires off of the Wi-Fi card. They should easily come off with a light tug. As you take each wire off, keep track of the numbered labels. These numbers correspond with contact points on the card.
  • Carefully pop the wires off of the Wi-Fi card. They should easily come off with a light tug.

  • As you take each wire off, keep track of the numbered labels. These numbers correspond with contact points on the card.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Erik Hoffnagle

Membro da: 11/04/2013

736 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 10-32, Maness Winter 2014 Membro di Cal Poly, Team 10-32, Maness Winter 2014

CPSU-MANESS-W14S10G32

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 34

Tutti i Tempi: 2,867