Introduzione

This guide is made to assist a user in replacing an HP Pavilion dv7-1285dx keyboard.

Ensure the device is powered down and unplugged.
  • Ensure the device is powered down and unplugged.

  • Turn the device upside down with the battery compartment facing you.

  • Slide the black slider to the right and lift the battery out of its compartment.

Aggiungi Commento

Using a Phillips Screwdriver,  remove the four Phillips M25x3.0 head screws. Using a Phillips Screwdriver,  remove the four Phillips M25x3.0 head screws.
  • Using a Phillips Screwdriver, remove the four Phillips M25x3.0 head screws.

Aggiungi Commento

Using a plastic opening tool on both the left and right sides to remove the upper portion of the top plate. Orient the device such that it’s partially opened (a little less than a 45 degree angle) and the hinge faces up.
  • Using a plastic opening tool on both the left and right sides to remove the upper portion of the top plate.

  • Orient the device such that it’s partially opened (a little less than a 45 degree angle) and the hinge faces up.

Aggiungi Commento

Orient the laptop so the screen is open and facing you. Grasp the top plate near the hinge and pull up.
  • Orient the laptop so the screen is open and facing you.

  • Grasp the top plate near the hinge and pull up.

  • This should expose a white ribbon cable.

Aggiungi Commento

Locate the dark grey slide on the sides of the ribbon cable plug. Using the plastic opening tool, push both sides of the dark gray slide towards the screen of the computer.
  • Locate the dark grey slide on the sides of the ribbon cable plug.

  • Using the plastic opening tool, push both sides of the dark gray slide towards the screen of the computer.

  • Unplug the ribbon cable and set the top plate aside.

Aggiungi Commento

Locate the four Phillips M2.0x2 head screws at the top of the keyboard and remove them. Gently lift the keyboard up from the screen side and pull the keyboard towards the screen.
  • Locate the four Phillips M2.0x2 head screws at the top of the keyboard and remove them.

  • Gently lift the keyboard up from the screen side and pull the keyboard towards the screen.

Aggiungi Commento

Locate the black ribbon cable attaching the keyboard to the computer. Find the grey slides on the side of the ribbon cable plug. Use the plastic opening tool to move the grey slides toward the screen.
  • Locate the black ribbon cable attaching the keyboard to the computer.

  • Find the grey slides on the side of the ribbon cable plug.

  • Use the plastic opening tool to move the grey slides toward the screen.

  • Unplug the black ribbon cable.

  • Remove the keyboard.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Jesse Quisido

Membro da: 14/04/2014

465 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 12-34, Maness Spring 2014 Membro di Cal Poly, Team 12-34, Maness Spring 2014

CPSU-MANESS-S14S12G34

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 17

Tutti i Tempi: 2,947