Introduzione

This guide instructs you how to remove the RAM. You will need the screwdriver listed in the tools section.

Parti

Nessuna parte richiesta.

Step 1 – Battery: Locate the battery release slider on the bottom of the laptop and move it in the direction of the arrow to the unlock position.
  • Step 1 – Battery: Locate the battery release slider on the bottom of the laptop and move it in the direction of the arrow to the unlock position.

  • The yellow highlighted edge of the battery should pop up slightly when the switch is moved

Aggiungi Commento

Step 2: Using the edge of the battery that has popped up, lift the battery out of the computer. Step 2: Using the edge of the battery that has popped up, lift the battery out of the computer.
  • Step 2: Using the edge of the battery that has popped up, lift the battery out of the computer.

Aggiungi Commento

Remove the two 3.5 mm diameter head and 7 mm long screws using the Philips PH1 screwdriver. Both screws will remain attached to the cover. Set the cover with attached screws to the side.
  • Remove the two 3.5 mm diameter head and 7 mm long screws using the Philips PH1 screwdriver.

  • Both screws will remain attached to the cover.

  • Set the cover with attached screws to the side.

  • The RAM will now be exposed

Aggiungi Commento

Find the two clips located on each side of the RAM. Using both hands, simultaneously grab each clip and open them away from the RAM stick. The RAM will pop up.
  • Find the two clips located on each side of the RAM.

  • Using both hands, simultaneously grab each clip and open them away from the RAM stick.

  • The RAM will pop up.

Aggiungi Commento

Using one hand, pull the RAM up and to the left to remove it. Using one hand, pull the RAM up and to the left to remove it.
  • Using one hand, pull the RAM up and to the left to remove it.

Aggiungi Commento

If there is a second RAM module present (as shown), repeat steps 2 and 3 to remove it.
  • If there is a second RAM module present (as shown), repeat steps 2 and 3 to remove it.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

Cal Poly, Team 14-10, Forte Fall 2013 Membro di Cal Poly, Team 14-10, Forte Fall 2013

CPSU-FORTE-F13S14G10

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 17

Tutti i Tempi: 1,463