Introduzione

This guide will show you how to successfully remove the wireless card from the laptop. You will need the screwdriver listed in the tools section.

Parti

Nessuna parte richiesta.

Step 1 – Battery: Locate the battery release slider on the bottom of the laptop and move it in the direction of the arrow to the unlock position.
  • Step 1 – Battery: Locate the battery release slider on the bottom of the laptop and move it in the direction of the arrow to the unlock position.

  • The yellow highlighted edge of the battery should pop up slightly when the switch is moved

Aggiungi Commento

Step 2: Using the edge of the battery that has popped up, lift the battery out of the computer. Step 2: Using the edge of the battery that has popped up, lift the battery out of the computer.
  • Step 2: Using the edge of the battery that has popped up, lift the battery out of the computer.

Aggiungi Commento

With the laptop upside down, locate the three screws on the wireless card cover and unscrew the screws.
  • With the laptop upside down, locate the three screws on the wireless card cover and unscrew the screws.

  • All three screws will have a 3.5 mm diameter head.

  • Two of the screws will be silver, 7mm in length, and will stay attached to the cover.

  • One screw will be black, 13mm in length, and will separate from the cover. Set this screw aside.

Aggiungi Commento

Grab one of the edges to the cover and lift up (towards you). Set the cover to the side.
  • Grab one of the edges to the cover and lift up (towards you).

  • Set the cover to the side.

  • The wireless card will now be exposed.

Aggiungi Commento

Using your hand, pull the black and white antenna wires upwards. This will disconnect the antenna wires from the card. This will disconnect the antenna wires from the card.
  • Using your hand, pull the black and white antenna wires upwards.

  • This will disconnect the antenna wires from the card.

Aggiungi Commento

Locate the two black screws connecting the wireless card to the laptop. They will have a 3.5 mm diameter head and be 4mm long. Remove the screws. Once the screws are removed, the wireless card will pop up.
  • Locate the two black screws connecting the wireless card to the laptop. They will have a 3.5 mm diameter head and be 4mm long. Remove the screws.

  • Once the screws are removed, the wireless card will pop up.

Aggiungi Commento

Grab the sides of the wireless card and pull it up and to the left to disconnect from the laptop. Grab the sides of the wireless card and pull it up and to the left to disconnect from the laptop.
  • Grab the sides of the wireless card and pull it up and to the left to disconnect from the laptop.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 14-10, Forte Fall 2013 Membro di Cal Poly, Team 14-10, Forte Fall 2013

CPSU-FORTE-F13S14G10

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 17

Tutti i Tempi: 1,080