Introduzione

Unplug your device from any power source and turn off your laptop before beginning.

Use the spudger to pry off the two rubber feet near the hinge of the laptop. This will reveal two hidden 9mm screws. You must remove eleven screws.
  • Use the spudger to pry off the two rubber feet near the hinge of the laptop. This will reveal two hidden 9mm screws.

  • You must remove eleven screws.

    • Four 9mm screws with the PH0 screwdriver.

    • Seven 6mm screws with the PH0 screwdriver.

Aggiungi Commento

Use the spudger to pry the corners of the laptop near the display hinges. Pry around the seam of the laptop with the plastic opening tool until the backing begins to pull apart. When you lift the bottom cover, there is a cable connected between the motherboard and the bottom cover. Be careful not to pull the cable loose!
  • Use the spudger to pry the corners of the laptop near the display hinges.

  • Pry around the seam of the laptop with the plastic opening tool until the backing begins to pull apart.

  • When you lift the bottom cover, there is a cable connected between the motherboard and the bottom cover. Be careful not to pull the cable loose!

Aggiungi Commento

Use the plastic opening tool to lift the white tab up at the connection. Pull the cable outwards.
  • Use the plastic opening tool to lift the white tab up at the connection.

  • Pull the cable outwards.

Aggiungi Commento

Remove the four 6mm screws from the battery with the PH0 screwdriver.
  • Remove the four 6mm screws from the battery with the PH0 screwdriver.

Aggiungi Commento

Use the spudger to pry up the blue/white speaker wires that are routed beside the battery. Use the spudger to pry up the blue/white speaker wires that are routed beside the battery. Use the spudger to pry up the blue/white speaker wires that are routed beside the battery.
  • Use the spudger to pry up the blue/white speaker wires that are routed beside the battery.

Aggiungi Commento

Remove the battery cable from the motherboard by gently pulling out on the black part of the cable closest to the white tab. Remove the battery cable from the motherboard by gently pulling out on the black part of the cable closest to the white tab.
  • Remove the battery cable from the motherboard by gently pulling out on the black part of the cable closest to the white tab.

Aggiungi Commento

Remove the battery. Remove the battery.
  • Remove the battery.

Aggiungi Commento

Remove two 6mm screws on each speaker with the PH0 screwdriver. Remove two 6mm screws on each speaker with the PH0 screwdriver. Remove two 6mm screws on each speaker with the PH0 screwdriver.
  • Remove two 6mm screws on each speaker with the PH0 screwdriver.

Aggiungi Commento

Disconnect the black cable that attaches the speakers to the motherboard by gently pulling the cable outward. Remove the speakers. Remove the speakers.
  • Disconnect the black cable that attaches the speakers to the motherboard by gently pulling the cable outward.

  • Remove the speakers.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Natalie

Membro da: 22/01/2015

753 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 19-9, Maness Winter 2015 Membro di Cal Poly, Team 19-9, Maness Winter 2015

CPSU-MANESS-W15S19G9

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 16

Tutti i Tempi: 828