Introduzione

Removing the front wheel of the Giant Reign 2 is a common first step for other repair guides. This guide will clearly show you how to use simple tools to remove the front wheel quickly and safely.

Parti

Nessuna parte richiesta.

Using the 4mm Allen wrench, partially unscrew the 4 (22mm) hex screws on the front of the axle casing to allow the axle to slide freely.
  • Using the 4mm Allen wrench, partially unscrew the 4 (22mm) hex screws on the front of the axle casing to allow the axle to slide freely.

Aggiungi Commento

Using the 8mm Allen wrench, loosen the axle screw until 1/2 of the axle screw is visible. Push the axle screw to reveal the axle rod on the other side.
  • Using the 8mm Allen wrench, loosen the axle screw until 1/2 of the axle screw is visible.

  • Push the axle screw to reveal the axle rod on the other side.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Using the Allen wrench, finish unscrewing the axle screw and pull it out.
  • Using the Allen wrench, finish unscrewing the axle screw and pull it out.

  • Hold the wheel when pulling out the axle rod so that the bike does not fall.

Aggiungi Commento

Pull the wheel from the fork.
  • Pull the wheel from the fork.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Andrew Krasts

Membro da: 05/10/2012

244 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 9-14, Amido Fall 2012 Membro di Cal Poly, Team 9-14, Amido Fall 2012

CPSU-AMIDO-F12S9G14

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 31

Tutti i Tempi: 2,808