Salta al contenuto principale

General Electric Telephone 2-9710A Phone Cord Replacement

Cosa ti serve

  1. General Electric Telephone 2-9710A Phone Cord Replacement, Phone Cord: passo 1, immagine 1 di 2 General Electric Telephone 2-9710A Phone Cord Replacement, Phone Cord: passo 1, immagine 2 di 2
    • Unplug the device before proceeding.

    • Using a plastic opening tool, remove the phone cord from the phone jack at the base of the headset.

    • To release the cable, gently press down on the top plastic tab of the connector.

  2. General Electric Telephone 2-9710A Phone Cord Replacement: passo 2, immagine 1 di 3 General Electric Telephone 2-9710A Phone Cord Replacement: passo 2, immagine 2 di 3 General Electric Telephone 2-9710A Phone Cord Replacement: passo 2, immagine 3 di 3
    • Remove the 7.5 mm screw.

    • Remove the screw cap.

    • Pull up the phone cord to remove it from the base.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team 16-59, Forte Fall 2012 Membro di Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 Membri

17 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,092