Introduzione

This guide is to replace the speaker located inside the phone base

Unplug the device before proceeding. Remove the phone cord from the phone jack from the base of the headset.
  • Unplug the device before proceeding.

  • Remove the phone cord from the phone jack from the base of the headset.

    • Use a plastic opening tool to remove the phone cord.

Aggiungi Commento

Remove the phone cord screw cap. Unscrew the 7.5mm screw. Remove the screw cap.
  • Remove the phone cord screw cap.

    • Unscrew the 7.5mm screw.

    • Remove the screw cap.

  • Remove the cord from the phone base.

Aggiungi Commento

Use finger to remove the battery cover. Use finger to remove the battery cover.
  • Use finger to remove the battery cover.

Aggiungi Commento

Remove the Volume Dial by gently grasping the dial and pulling away from the base. Remove the Volume Dial by gently grasping the dial and pulling away from the base.
  • Remove the Volume Dial by gently grasping the dial and pulling away from the base.

Aggiungi Commento

Remove the 6 screws from the base shell.
  • Remove the 6 screws from the base shell.

    • Remove the 3 12mm screws with the Philips head #1 screw driver.

    • Remove the 3 18mm screws with the Philips head #1 screw driver.

Aggiungi Commento

Pry off the base shell using a Plastic Opener Tool. Pry off the base shell using a Plastic Opener Tool.
  • Pry off the base shell using a Plastic Opener Tool.

Aggiungi Commento

Slightly pull out speaker. Cut wire as close as speaker as possible with wire cutters. Remove speaker.
  • Slightly pull out speaker.

  • Cut wire as close as speaker as possible with wire cutters.

  • Remove speaker.

Aggiungi Commento

Strip the wire half an inch using wire strippers for a 24 gauge wire. Strip the wire half an inch using wire strippers for a 24 gauge wire. Strip the wire half an inch using wire strippers for a 24 gauge wire.
  • Strip the wire half an inch using wire strippers for a 24 gauge wire.

Aggiungi Commento

Solder on the new speaker.
  • Solder on the new speaker.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 16-59, Forte Fall 2012 Membro di Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 1,068