Salta al contenuto principale

Gateway SA1 Wireless Card Replacement

Cosa ti serve

  1. Gateway SA1 Wireless Card Replacement, Wireless Card: passo 1, immagine 1 di 1
    • The first thing you need to do is remove the panel concealing the wireless card, by taking out the screws.

  2. Gateway SA1 Wireless Card Replacement: passo 2, immagine 1 di 1
    • Locate the wireless card on the right side of the now removed panel.

  3. Gateway SA1 Wireless Card Replacement: passo 3, immagine 1 di 1
    • Remove the screws in the two possible locations.

  4. Gateway SA1 Wireless Card Replacement: passo 4, immagine 1 di 1
    • After removing the screws, gently pull upwards on the end of the wireless card until it is angled as shown.

  5. Gateway SA1 Wireless Card Replacement: passo 5, immagine 1 di 1
    • Pull the card diretly outward from its socket, all while being mindful of the connected wires.

    • Remove the wired connections by gently pulling them diretly away from the card. Please remember where each one was connected, it will be useful for reconnecting

    • Reconnect wires to new wireless card and screw back into place.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Shawn Cabral

Membro da: 03/12/14

463 Reputazione

4 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 648