Introduzione

The RAM can be replaced if you have a Phillips #0 screwdriver.

Parti

Nessuna parte richiesta.

Unlock the tab located in the top left corner of the netbook. The red tab indicated that the battery has been properly unlocked. Remove the battery.
  • Unlock the tab located in the top left corner of the netbook.

  • The red tab indicated that the battery has been properly unlocked.

  • Remove the battery.

  • When working with electronics, it is always wise to remove the power source before taking the device apart.

Aggiungi Commento

The RAM is located under this cover.
  • The RAM is located under this cover.

Aggiungi Commento

Using a Phillips #0 screwdriver, remove one (1) 5mm screw holding the cover in place. Use a plastic opening tool to remove the cover. Use a plastic opening tool to remove the cover.
  • Using a Phillips #0 screwdriver, remove one (1) 5mm screw holding the cover in place.

  • Use a plastic opening tool to remove the cover.

Aggiungi Commento

Unlock the RAM by pinching the metal clamps that keep the RAM in place. Remove the RAM while the metal clamps are disengaged.
  • Unlock the RAM by pinching the metal clamps that keep the RAM in place.

  • Remove the RAM while the metal clamps are disengaged.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Lydia Benjock

Membro da: 18/10/2013

1.189 Reputazione

22 Guide realizzate

Team

Clemson, Team 14-3, Benson Fall 2013 Membro di Clemson, Team 14-3, Benson Fall 2013

CLEM-BENSON-F13S14G3

3 Membri

24 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 14

Tutti i Tempi: 1,511