Introduzione

removal of the system board

Flip the laptop over. Slide the battery release tab to the right.
  • Flip the laptop over. Slide the battery release tab to the right.

Aggiungi Commento

Lift the battery out.
  • Lift the battery out.

Aggiungi Commento

Slide release and push button to eject drive
  • Slide release and push button to eject drive

  • Pull drive out.

  • When reinserting drives be sure to insert back into original slot in order to avoid interface conflicts.

Aggiungi Commento

Unscrew 1 captive screw holding hard drive cover on.
  • Unscrew 1 captive screw holding hard drive cover on.

  • slide hard drive to the right and remove.

  • for detailed pictures and info go to Gateway Support

Aggiungi Commento

Insert spudger between sysrq and ins keys.
  • Insert spudger between sysrq and ins keys.

  • Gently lift power button panel from the right to left.

Aggiungi Commento

Remove 5 screws.
  • Remove 5 screws.

  • 4 screws holding LCD hinge covers in place and 1 screw for LCD grounding.

  • Remove hinge covers.

Aggiungi Commento

Gently unplug LCD from system board.
  • Gently unplug LCD from system board.

Aggiungi Commento

Remove 6 screws holding LCD to hinge.
  • Remove 6 screws holding LCD to hinge.

Aggiungi Commento

Pull LCD away from case.
  • Pull LCD away from case.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Remove the 5 screws holding the keyboard in place.
  • Remove the 5 screws holding the keyboard in place.

Aggiungi Commento

CAUTION: When lifting the keyboard out, do not lift keyboard up. Only fold back along the space bar edge. DO NOT PULL the black cable by the ribbon section; only pull it by the connector itself.
  • CAUTION: When lifting the keyboard out, do not lift keyboard up. Only fold back along the space bar edge.

  • DO NOT PULL the black cable by the ribbon section; only pull it by the connector itself.

  • Follow the black ribbon cable to the connector and gently pull straight up.

Aggiungi Commento

Unscrew the 4 captive screws. Unplug fan from the system and pull it out. The fan unit should slide forward before coming free.
  • Unscrew the 4 captive screws.

  • Unplug fan from the system and pull it out. The fan unit should slide forward before coming free.

Aggiungi Commento

Remove 13 screws from bottom of computer
  • Remove 13 screws from bottom of computer

Aggiungi Commento

Remove screws
  • Remove screws

Aggiungi Commento

remove 4 screws from back of case
  • remove 4 screws from back of case

Aggiungi Commento

WARNING Failure to do this step will damage mouse pad ribbon.
  • WARNING Failure to do this step will damage mouse pad ribbon.

  • Lift plug holding mouse ribbon about 1/16 inch or until it stops

  • remove ribbon

Aggiungi Commento

Insert spudger between upper and lower case at drive bay closest to battery.
  • Insert spudger between upper and lower case at drive bay closest to battery.

  • Carefully and slowly go arount entire case unseating all plastic clips holding upper to lower.

Aggiungi Commento

Lift upper case free about 1/4 inch
  • Lift upper case free about 1/4 inch

  • At rear of case is one last connecting wire. Unplug and remove upper case

Aggiungi Commento

Remove  8 screws from drive bays. Remove  8 screws from drive bays.
  • Remove 8 screws from drive bays.

Aggiungi Commento

Remove 6 5mm hex nuts from back of laptop.
  • Remove 6 5mm hex nuts from back of laptop.

Aggiungi Commento

Remove screw
  • Remove screw

  • Slide metal clip into battery bay

Aggiungi Commento

Remove two screws.
  • Remove two screws.

  • Hard drive extension should lift out from system board.

Aggiungi Commento

Remove 4 screws holding left speaker for ease of access to connectors and external sound board.
  • Remove 4 screws holding left speaker for ease of access to connectors and external sound board.

Aggiungi Commento

Remove screw and unplug speakers from external sound board.
  • Remove screw and unplug speakers from external sound board.

  • Lift external soundboard away from system board and remove.

Aggiungi Commento

Unplug audio DJ
  • Unplug audio DJ

  • Unplug System status light board

  • Starting on the right side of case gently lift and slide system board till it comes free of lower case.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Elizabeth Mazer

Membro da: 14/10/2010

78 Reputazione

20 Guide realizzate

Team

Cal Poly, Team 20-10, Maness Fall 2010 Membro di Cal Poly, Team 20-10, Maness Fall 2010

CPSU-MANESS-F10S20G10

3 Membri

22 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,438