Aggiusta la tua roba Comunità Store

Garmin StreetPilot c320 Rear Case Assembly Replacement

Introduzione

Before you begin disassembling the device, be sure the power is off.

Cosa ti serve

  1. Garmin StreetPilot c320 Rear Case Assembly Replacement, Rear Case Assembly: passo 1, immagine 1 di 2 Garmin StreetPilot c320 Rear Case Assembly Replacement, Rear Case Assembly: passo 1, immagine 2 di 2

    • Wedge a plastic opening tool in between the outer frame and the rear panel assembly.

    • Pry the outer frame off the perimeter of the rear panel assembly.

    • The cover will easily pop off.

    Traduci

  3. Garmin StreetPilot c320 Rear Case Assembly Replacement: passo 2, immagine 1 di 2 Garmin StreetPilot c320 Rear Case Assembly Replacement: passo 2, immagine 2 di 2

    • Remove the four #00 Phillips screws securing the front case assembly to the rear case assembly.

    • Carefully lift, but do not completely separate, the front case assembly from the rear case assembly.

    • Be extremely cautious when separating both halves, as the rear case assembly is still attached to the front case assembly via a few connectors.

    Traduci

  4. Garmin StreetPilot c320 Rear Case Assembly Replacement: passo 3, immagine 1 di 1

    • Gently pull the battery cable connector from its socket on the motherboard.

    • The second connector can remain attached to the motherboard, but be careful not to break the connector while handling both halves of the device.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 8 altri collaboratori

Andrew Burman

Membro da: 01/18/12

1 Reputazione

1 Guida realizzata

Distintivi: 1

Team

Cal Poly, Team 11-19, Maness Winter 2012 Membro di Cal Poly, Team 11-19, Maness Winter 2012

CPSU-MANESS-W12S11G19

4 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,369