Introduzione

Is the outside shell of your Game Boy cracked, damaged, or you're just getting sick of your old housing? This guide outlines how to get down to the front housing so you can swap it out!

Locate the battery compartment on the back of the Game Boy Color. Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.
  • Locate the battery compartment on the back of the Game Boy Color.

  • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

Aggiungi Commento

Remove the batteries from the battery compartment.
  • Remove the batteries from the battery compartment.

Aggiungi Commento

Using a Y1 screwdriver, remove the six screws on the back of the device as pictured.  The bottom two screws are located inside of the battery compartment.
  • Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

Aggiungi Commento

Gently lift and separate the back housing from the rest of the device.  Now you've got the back housing out! Gently lift and separate the back housing from the rest of the device.  Now you've got the back housing out!
  • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Push up on the tabs on either side of the ribbon with a spudger.
  • Push up on the tabs on either side of the ribbon with a spudger.

Aggiungi Commento

Gently remove the ribbon cable from the port
  • Gently remove the ribbon cable from the port

Aggiungi Commento

Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture. Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.
  • Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.

Aggiungi Commento

Gently lift the motherboard from the front housing.
  • Gently lift the motherboard from the front housing.

Aggiungi Commento

Remove the rubber backing on each button grouping.
  • Remove the rubber backing on each button grouping.

Aggiungi Commento

Remove the original buttons from the housing.
  • Remove the original buttons from the housing.

Aggiungi Commento

Gently pry and lift the LCD Display from the front panel. Twisting the front casing may help gain more leverage.
  • Gently pry and lift the LCD Display from the front panel.

    • Twisting the front casing may help gain more leverage.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 11 persone hanno completato questa guida.

Angela Yoeurng

Membro da: 18/01/2013

938 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 19-47, Regan Winter 2013 Membro di Cal Poly, Team 19-47, Regan Winter 2013

CPSU-REGAN-W13S19G47

4 Membri

24 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 71

Tutti i Tempi: 4,978