Introduzione

Accessing the RAM in this computer is straightforward and requires minimal disassembly.

Parti

Nessuna parte richiesta.

Locate the two clips on the bottom of the computer that support the battery.
  • Locate the two clips on the bottom of the computer that support the battery.

Aggiungi Commento

Using your fingers,  push the clips inward and then upward.
  • Using your fingers, push the clips inward and then upward.

  • Lift the battery out of the computer.

Aggiungi Commento

Locate the RAM cover.
  • Locate the RAM cover.

Aggiungi Commento

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the screw labeled “3.”
  • Remove the screw labeled “3.”

  • The screw is not shown in the picture.

Aggiungi Commento

Remove the RAM cover by lifting it with your finger. Remove the RAM cover by lifting it with your finger.
  • Remove the RAM cover by lifting it with your finger.

Aggiungi Commento

Remove the RAM module by pushing the securing clips outward. The RAM module will then slightly pop out.
  • Remove the RAM module by pushing the securing clips outward.

  • The RAM module will then slightly pop out.

  • When you are installing a new RAM module, carefully insert it into the socket and push downwards.

Aggiungi Commento

Carefully pull the RAM module from the computer. Carefully pull the RAM module from the computer.
  • Carefully pull the RAM module from the computer.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Neil Daniels

Membro da: 17/01/2011

1.267 Reputazione

11 Guide realizzate

Team

Cal Poly, Team 5-18, Amido Winter 2011 Membro di Cal Poly, Team 5-18, Amido Winter 2011

CPSU-AMIDO-W11S5G18

3 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 8

Tutti i Tempi: 2,737