Introduzione

A guide on how to take out the many screws located on the inside, metal cover and how to install an LCD.

Remove the screws from the bottom of the camera using the tri-wing screwdriver.
  • Remove the screws from the bottom of the camera using the tri-wing screwdriver.

    • Three 5.4 mm tri-head screws.

Aggiungi Commento

Remove screws from charger side of camera using the Phillips 00 screwdriver.
  • Remove screws from charger side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Aggiungi Commento

Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.
  • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Aggiungi Commento

Separate the front and back casing using the spudger. Gently pull apart the two casings. Pull the back casing away from the camera.
  • Separate the front and back casing using the spudger.

  • Gently pull apart the two casings.

  • Pull the back casing away from the camera.

Aggiungi Commento

Remove screws from the casing covering the LCD using the Phillips 00 screwdriver.
  • Remove screws from the casing covering the LCD using the Phillips 00 screwdriver.

    • Remove the fifteen 2.9 mm Phillips #00 screws.

Aggiungi Commento

Slide casing out using the spudger.
  • Slide casing out using the spudger.

Aggiungi Commento

Gently remove the LCD display data cable by gripping the end that is connected to the motherboard and pulling out. Gently remove the LCD display data cable by gripping the end that is connected to the motherboard and pulling out.
  • Gently remove the LCD display data cable by gripping the end that is connected to the motherboard and pulling out.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Sarah Looper

Membro da: 11/03/2013

76 Reputazione

7 Guide realizzate

Team

Clemson, Team 13-4, Benson Spring 2013 Membro di Clemson, Team 13-4, Benson Spring 2013

CLEM-BENSON-S13S13G4

2 Membri

8 Guide realizzate

Great Guide! Worked great to replace my screen!

Daniel - Replica

Awesome guide! BEST WORK I'VE EVER SEEN ON A REPAIR GUIDE

Johnston Thayer - Replica

Shutter button replacement was great too!

Daniel -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 615