Salta al contenuto principale

Fujifilm Finepix F10 6.3 MP Front cover Replacement

Cosa ti serve

  1. Fujifilm Finepix F10 6.3 MP Front cover Replacement, Back Cover: passo 1, immagine 1 di 1
    • Remove the screws from the bottom of the camera using the tri-wing screwdriver.

    • Three 5.4 mm tri-head screws.

  2. Fujifilm Finepix F10 6.3 MP Front cover Replacement: passo 2, immagine 1 di 1
    • Remove screws from charger side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

  3. Fujifilm Finepix F10 6.3 MP Front cover Replacement: passo 3, immagine 1 di 1
    • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

  4. Fujifilm Finepix F10 6.3 MP Front cover Replacement: passo 4, immagine 1 di 3 Fujifilm Finepix F10 6.3 MP Front cover Replacement: passo 4, immagine 2 di 3 Fujifilm Finepix F10 6.3 MP Front cover Replacement: passo 4, immagine 3 di 3
    • Separate the front and back casing using the spudger.

    • Gently pull apart the two casings.

    • Pull the back casing away from the camera.

  5. Fujifilm Finepix F10 6.3 MP Front cover Replacement, Front cover: passo 5, immagine 1 di 1
    • Remove screws from motherboard using the Phillips 00 screwdriver.

    • Two 2.5 mm widehead Phillips screws

    • One 3.3 mm #00 Phillips screws

    • Three 2.5 mm #00 Phillips screws (black screws)

  6. Fujifilm Finepix F10 6.3 MP Front cover Replacement: passo 6, immagine 1 di 1
    • Rotate the front cover clockwise onto its side and remove the single screw on the side using a Phillips 00 screwdriver.

    • Remove 3.3 mm #00 Phillips screw from the side of the front screen.

  7. Fujifilm Finepix F10 6.3 MP Front cover Replacement: passo 7, immagine 1 di 2 Fujifilm Finepix F10 6.3 MP Front cover Replacement: passo 7, immagine 2 di 2
    • Firmly grasp both the motherboard and front cover. Slowly pull the front cover away from the motherboard.

    • Do not be alarmed if it takes substantial pressure to separate the two.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Sarah Looper

Membro da: 03/11/13

100 Reputazione

7 Guide realizzate

Team

Clemson, Team 13-4, Benson Spring 2013 Membro di Clemson, Team 13-4, Benson Spring 2013

CLEM-BENSON-S13S13G4

2 Membri

16 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 856