Aggiusta la tua roba Comunità Store

Fujifilm FinePix S8200 Rear Housing Cover Replacement

Introduzione

The rear housing cover protects the back of the camera. If the rear housing cover is cracked or damaged, it should be replaced.

Cosa ti serve

  1. Fujifilm FinePix S8200 Rear Housing Cover Replacement, Batteries: passo 1, immagine 1 di 1

    • Turn the camera upside down so you can access the battery chamber.

    • Make sure that the camera is powered off before opening the battery chamber. Not doing so could damage your memory card.

    Traduci

  2. Fujifilm FinePix S8200 Rear Housing Cover Replacement: passo 2, immagine 1 di 1

    • Push the battery chamber latch in the direction of the front of the camera. Keeping tension on the latch, slide the battery chamber cover toward the outside of the camera, opening the battery chamber.

    Traduci

  4. Fujifilm FinePix S8200 Rear Housing Cover Replacement: passo 3, immagine 1 di 1

    • With the battery chamber open, remove the old batteries.

    • When replacing the batteries, remember that the battery orientation is shown by the + and - marks. Each mark indicates which side of the battery faces up in the chamber.

    Traduci

  5. Fujifilm FinePix S8200 Rear Housing Cover Replacement, Rear Housing Cover: passo 4, immagine 1 di 3 Fujifilm FinePix S8200 Rear Housing Cover Replacement, Rear Housing Cover: passo 4, immagine 2 di 3 Fujifilm FinePix S8200 Rear Housing Cover Replacement, Rear Housing Cover: passo 4, immagine 3 di 3

    • Remove the 4mm JIS #00 screws from the sides and bottom of the camera.

    Traduci

  6. Fujifilm FinePix S8200 Rear Housing Cover Replacement: passo 5, immagine 1 di 3 Fujifilm FinePix S8200 Rear Housing Cover Replacement: passo 5, immagine 2 di 3 Fujifilm FinePix S8200 Rear Housing Cover Replacement: passo 5, immagine 3 di 3

    • Carefully pry away the rear housing cover with the plastic opening tool.

    Traduci

  7. Fujifilm FinePix S8200 Rear Housing Cover Replacement: passo 6, immagine 1 di 1

    • Remove the rear housing cover by carefully pulling it away from the camera.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 5 altri collaboratori

Marcos

Membro da: 01/20/15

101 Reputazione

1 Guida realizzata

Distintivi: 3

Team

USF Tampa, Team 7-1, Remmell Winter 2015 Membro di USF Tampa, Team 7-1, Remmell Winter 2015

USFT-REMMELL-W15S7G1

4 Membri

9 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 938