Introduzione

This Flip Ultra HD had numerous faults. It is well used and needs a bit of work. This repair is straight forward and does not require a lot of tools.

Parti

Nessuna parte richiesta.

Here is the Flip Ultra HD and it shows lots of use. The USB latch does not return to the upright position when the USB arm is retracted. Slide the battery latch to unlock
  • Here is the Flip Ultra HD and it shows lots of use.

  • The USB latch does not return to the upright position when the USB arm is retracted.

  • Slide the battery latch to unlock

Aggiungi Commento

Slide the front panel down and up to remove. Remove the battery by pulling up on the tab Peel the identification sticker back about half way.
  • Slide the front panel down and up to remove.

  • Remove the battery by pulling up on the tab

  • Peel the identification sticker back about half way.

Aggiungi Commento

Beneath the sticker is a rectangular opening that houses the spring for the USB latch return. In this case it is clearly broken Use a pair of Needle Nose Pliers to remove and replace the spring
  • Beneath the sticker is a rectangular opening that houses the spring for the USB latch return. In this case it is clearly broken

  • Use a pair of Needle Nose Pliers to remove and replace the spring

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

oldturkey03

Membro da: 29/09/2010

502.885 Reputazione

117 Guide realizzate

Team

OTS Membro di OTS

Business

1 Membro

117 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 506