Introduzione

If you determine there is no suction at the end of the hose, this guide will help you to replace a damaged hose.

On the back of the vacuum, pull the handle connected to the hose away from the vacuum. On the back of the vacuum, pull the handle connected to the hose away from the vacuum.
  • On the back of the vacuum, pull the handle connected to the hose away from the vacuum.

Aggiungi Commento

Grasp the thick smooth collar at the bottom of the hose and twist left (counterclockwise) to remove the hose. Grasp the thick smooth collar at the bottom of the hose and twist left (counterclockwise) to remove the hose.
  • Grasp the thick smooth collar at the bottom of the hose and twist left (counterclockwise) to remove the hose.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Celina Burchett

Membro da: 13/10/2014

1.031 Reputazione

8 Guide realizzate

Team

Clemson, Team 2-2, Benson Fall 2014 Membro di Clemson, Team 2-2, Benson Fall 2014

CLEM-BENSON-F14S2G2

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 15

Tutti i Tempi: 951