Parti

Nessuna parte richiesta.

Insert the flat end of a spudger on both sides of the wiring box to open and detach the box from the clock. Insert the flat end of a spudger on both sides of the wiring box to open and detach the box from the clock. Insert the flat end of a spudger on both sides of the wiring box to open and detach the box from the clock.
  • Insert the flat end of a spudger on both sides of the wiring box to open and detach the box from the clock.

Aggiungi Commento

remove the box with your fingers.
  • remove the box with your fingers.

Aggiungi Commento

Detach the wires that connect the wiring to the battery compartment and the copper cylinder by using soldering iron. Detach the wires that connect the wiring to the battery compartment and the copper cylinder by using soldering iron.
  • Detach the wires that connect the wiring to the battery compartment and the copper cylinder by using soldering iron.

Aggiungi Commento

Using your hand remove the wiring box and replace it with a new one. Using your hand remove the wiring box and replace it with a new one.
  • Using your hand remove the wiring box and replace it with a new one.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Is there someone I can send my alarm clock to for fixing? IF so, how much would it cost? I do not have the tools nor the know how to do it. Most likely, the alarm will have to be replaced. The little motor on the inside is not working when it is time for it to go off. It does not move the ringer/clanger. Thanks,

mariacarbonell@comcast.net

Maria Carbonell - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 36

Tutti i Tempi: 1,075