Salta al contenuto principale

Dyson DC56 Battery Replacement

Cosa ti serve

  1. Dyson DC56 Battery Replacement, Battery: passo 1, immagine 1 di 1
    • Make sure the vacuum is unplugged from charger.

    • Warning: Avoid pressing red trigger because the vacuum will turn on the device and begin suction.

  2. Dyson DC56 Battery Replacement: passo 2, immagine 1 di 1
    • Locate the purple button at the top of the device.

  3. Dyson DC56 Battery Replacement: passo 3, immagine 1 di 1
    • Separate the device with the purple button.

  4. Dyson DC56 Battery Replacement: passo 4, immagine 1 di 1
    • Take out the filter.

  5. Dyson DC56 Battery Replacement: passo 5, immagine 1 di 1
    • Locate and remove the 10mm Phillips head screw using a Phillips #1 screw driver.

  6. Dyson DC56 Battery Replacement, Battery screw 2: passo 6, immagine 1 di 1
    • Locate and remove #000 25mm phillips screw on the reverse side of the vacuum

  7. Dyson DC56 Battery Replacement: passo 7, immagine 1 di 1
    • Pull the battery pack down and away from the main body and remove it from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 9 persone hanno completato questa guida.

Vu Nguyen

Membro da: 10/02/17

189 Reputazione

1 Guida realizzata

Team

USF Tampa, Team S10-G1, Thompson Fall 2017 Membro di USF Tampa, Team S10-G1, Thompson Fall 2017

USFT-THOMPSON-F17S10G1

4 Membri

11 Guide realizzate

9 Commenti

Works for the DC44 animal also. :)

Tina Willman-Hammar - Replica

You left out the removal of the screw above the charging port.

Mike - Replica

And after unscrewing the 2nd screw, you need very fine tweezers to extract it.

This experience has convinced me never to buy a Dyson product. Their manual gives no info about replacing the battery.

Loohan7 - Replica

Vu Nguyen and contributors should definitely go back in and REVISE these instructions to include the second screw mentioned by Mike 7/29/18. I almost broke my vacuum because I trust iFixit to vet their content. I discovered the second screw after going to another site and only saw Mike’s post after returning here to see if I missed something - I did: I didn’t read his comments!

Cliff - Replica

Yikes! Thanks goodness I read the comments before I too almost broke something by not removing the second screw!

Mark Nicoll - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 6

Ultimi 7 Giorni: 24

Ultimi 30 Giorni: 98

Tutti i Tempi: 9,885