Aggiusta la tua roba Comunità Store

Disassembling of Wahl Lithium Ion Trimmer

Introduzione

To replace the battery, you will very likely need a soldering iron and solder. Model number 9854L has the battery soldered to the + and - terminals.

Cosa ti serve

  1. Disassembling of Wahl Lithium Ion Trimmer, Disassembling of Wahl Lithium Ion Trimmer: passo 1, immagine 1 di 2 Disassembling of Wahl Lithium Ion Trimmer, Disassembling of Wahl Lithium Ion Trimmer: passo 1, immagine 2 di 2

    • Begin by removing the rubber grip along the handle.

    Traduci

  3. Disassembling of Wahl Lithium Ion Trimmer: passo 2, immagine 1 di 1

    • Remove the screws from the top to take the metal piece and plastic part off.

    Traduci

  4. Disassembling of Wahl Lithium Ion Trimmer: passo 3, immagine 1 di 2 Disassembling of Wahl Lithium Ion Trimmer: passo 3, immagine 2 di 2

    • Pry open the plastic cover into two separate pieces. The plastic is very durable so don't worry about breaking it upon prying it open.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 12 persone hanno completato questa guida.

3 Commenti

Well this does not show how to properly remove the metal piece that surrounds the power button , which needs to be removed to access 2 screws ( that I can see it) that need to be removed to completely separate the plastic encasement of the intrrnals has

Andrew Beeson - Replica

very helpful for the first two steps. I need like six more between the 2nd step and the last step. but otherwise, very helpful.  Thank you so much

tundraorchid - Replica

Thanks…worked well.

Magpie - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 8

Ultimi 7 Giorni: 38

Ultimi 30 Giorni: 174

Tutti i Tempi: 43,454