Introduzione

Access to Hard Disk Drive

Pry up cover, remove screw.
  • Pry up cover, remove screw.

Aggiungi Commento

Remove screws.
  • Remove screws.

Aggiungi Commento

Gently pry out to unsnap top plastic housing.
  • Gently pry out to unsnap top plastic housing.

Aggiungi Commento

Lift keyboard and flip over, but do not remove, it is still attached by ribbon cable.
  • Lift keyboard and flip over, but do not remove, it is still attached by ribbon cable.

  • Slide back connector tabs to release ribbon cable.

  • Remove 5 screws and lift out plate to access HDD and FDD.

Aggiungi Commento

To remove HDD loosen tape, lift out BIOS battery, remove screws and slide back HDD housing.
  • To remove HDD loosen tape, lift out BIOS battery, remove screws and slide back HDD housing.

In this view, the ribbon cable connector tabs are shown in their open position.

WayneG - Replica

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

WayneG

Membro da: 13/05/2013

191 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 13

Tutti i Tempi: 1,813