Parti

Nessuna parte richiesta.

Flip the toy over, so that the keypad is facing away from you. Remove two Phillips-head screws.
  • Flip the toy over, so that the keypad is facing away from you.

  • Remove two Phillips-head screws.

  • Insert a plastic spudger (or 4!) into the marked holes, and push down and towards the edge to release each catch.

  • It's possible to release each catch one-at-a-time, but easier if you have 4 tools and do them simultaneously.

  • This requires quite a bit of force; be careful.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Separate the two halves of the case to expose the inner PCB, speaker and battery holder.
  • Separate the two halves of the case to expose the inner PCB, speaker and battery holder.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

bushing

Membro da: 23/04/2010

9.026 Reputazione

17 Guide realizzate

I got one of these. I've opened the case and the battery connections are silver and show no corrosion at all. I replaced the batteries, swapped out one of the Word Modules. I got a bit of static once, but now nothing. All the wire connection soldering looks fine. Any ideas?

stevehelium@gmail.com

Stephen Henderson - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 20

Tutti i Tempi: 3,308