Introduzione

How to remove keyboard

Push open the latch and remove the battery. Push open the latch and remove the battery.
  • Push open the latch and remove the battery.

Aggiungi Commento

Twist off the antenna. Pop off the transparent cylinder.
  • Twist off the antenna.

  • Pop off the transparent cylinder.

Aggiungi Commento

Remove the five screws as shown.
  • Remove the five screws as shown.

Aggiungi Commento

Carefully pry the back plate off.
  • Carefully pry the back plate off.

Aggiungi Commento

Carefully detach golden screen connector. Carefully detach golden screen connector.
  • Carefully detach golden screen connector.

Aggiungi Commento

Pop out the logic board with spudger. Caution: Do not touch with bare hands, use tweezers or wash hands before contact.
  • Pop out the logic board with spudger.

  • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

Aggiungi Commento

Place the logic board on a clean tray. Place the logic board on a clean tray.
  • Place the logic board on a clean tray.

Aggiungi Commento

Peel off the keyboard.
  • Peel off the keyboard.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

doconnor

Membro da: 19/04/2010

25 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 10-43, Garner Spring 2010 Membro di Cal Poly, Team 10-43, Garner Spring 2010

CPSU-GARNER-S10S10G43

5 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,056