Introduzione

Removing the casing is necessary to replace the LCD screen or the buttons.

Parti

Nessuna parte richiesta.

Locate the battery cover on the bottom of the camera.
  • Locate the battery cover on the bottom of the camera.

Aggiungi Commento

Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.
  • Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.

Aggiungi Commento

Remove the batteries from the camera.
  • Remove the batteries from the camera.

Aggiungi Commento

Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.
  • Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.

Aggiungi Commento

Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.
  • Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.

  • Repeat this step for the back casing.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Dani

Membro da: 24/06/2010

21 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 3-3, Johann Summer 2010 Membro di Cal Poly, Team 3-3, Johann Summer 2010

CPSU-JOHANN-R10S3G3

2 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,439