Introduzione

This is a guide to removing the macroline that connects the POPS and the regulator. This is necessary if the macroline is leaking or to disassemble the body.

Remove the macroline from the fitting by pulling the metal ring around the end of the fitting away while pulling out the macroline. It helps to rotate the collar to create room to pull out macroline. It helps to rotate the collar to create room to pull out macroline.
  • Remove the macroline from the fitting by pulling the metal ring around the end of the fitting away while pulling out the macroline.

    • It helps to rotate the collar to create room to pull out macroline.

Aggiungi Commento

While pulling in the metal ring on the fitting, pull the macroline out. While pulling in the metal ring on the fitting, pull the macroline out. While pulling in the metal ring on the fitting, pull the macroline out.
  • While pulling in the metal ring on the fitting, pull the macroline out.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Rett Triplett

Membro da: 18/10/2013

801 Reputazione

8 Guide realizzate

Team

Clemson, Team 13-6, Benson Fall 2013 Membro di Clemson, Team 13-6, Benson Fall 2013

CLEM-BENSON-F13S13G6

3 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 649