Introduzione

Removing the Main Display

Parti

Nessuna parte richiesta.

Turn off the phone. Position the phone so that the back side is in view.
  • Turn off the phone.

  • Position the phone so that the back side is in view.

Aggiungi Commento

Apply pressure on the cover while simultaneously sliding the cover downward.
  • Apply pressure on the cover while simultaneously sliding the cover downward.

  • Remove the back battery cover.

Aggiungi Commento

Insert the spudger between the base of the phone and the phone battery. Position the phone so that the battery won't fall out of the phone. Carefully lift the battery out of the phone.
  • Insert the spudger between the base of the phone and the phone battery.

  • Position the phone so that the battery won't fall out of the phone.

  • Carefully lift the battery out of the phone.

    • The battery lifts out of the phone easily.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Keep the phone closed.
  • Keep the phone closed.

  • Hold the phones sideways with the front cover of the phone facing up.

Aggiungi Commento

Find the slight crease on the side that divides the display assembly in half. Slowly wedge the spudger into the crease.
  • Find the slight crease on the side that divides the display assembly in half.

  • Slowly wedge the spudger into the crease.

    • It's a little difficult to perform this step because the crease is narrow. Do not rush because you may damage the phone

Aggiungi Commento

Run the spudger all along the crease while lifting up. Separate the front cover from the front base.
  • Run the spudger all along the crease while lifting up.

  • Separate the front cover from the front base.

Aggiungi Commento

Remove the four 5mm screws on the metal casing using the T6 Torx screwdriver. Remove the four 5mm screws on the metal casing using the T6 Torx screwdriver.
  • Remove the four 5mm screws on the metal casing using the T6 Torx screwdriver.

Aggiungi Commento

Using the spudger, disconnect the green display cable. Using the spudger, disconnect the green display cable.
  • Using the spudger, disconnect the green display cable.

Aggiungi Commento

Lift the metal casing. Be careful not to pull the casing too hard because it is still attached to the phone by a wire. Remove the main display from under the metal casing.
  • Lift the metal casing.

    • Be careful not to pull the casing too hard because it is still attached to the phone by a wire.

  • Remove the main display from under the metal casing.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Michael Machado

Membro da: 21/01/2011

334 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 1-14, Amido Winter 2011 Membro di Cal Poly, Team 1-14, Amido Winter 2011

CPSU-AMIDO-W11S1G14

5 Membri

16 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 963