Parti

Nessuna parte richiesta.

Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera.
  • Remove the screws from the bottom, right, and left side of camera.

Aggiungi Commento

Remove the back of the camera, may require force.
  • Remove the back of the camera, may require force.

Aggiungi Commento

Unscrew the right metal bracket of the viewing lens
  • Unscrew the right metal bracket of the viewing lens

Aggiungi Commento

Unscrew the top right corner screw
  • Unscrew the top right corner screw

Aggiungi Commento

Unscrew the bottom right corner screw.
  • Unscrew the bottom right corner screw.

Aggiungi Commento

Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.
  • Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Pull the front of the camera off of the mother board. Pull the front of the camera off of the mother board.
  • Pull the front of the camera off of the mother board.

Aggiungi Commento

Unscrew the grey plastic around the screen
  • Unscrew the grey plastic around the screen

Aggiungi Commento

Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.
  • Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.

Aggiungi Commento

Maneuver to detach the flash bulb.
  • Maneuver to detach the flash bulb.

Aggiungi Commento

Unscrew the metal bracket under the lens
  • Unscrew the metal bracket under the lens

Aggiungi Commento

Slide the plastic bracket through the metal bracket.
  • Slide the plastic bracket through the metal bracket.

Aggiungi Commento

  • Remove the orange cable from the motherboard.

Aggiungi Commento

Pull the black tape off.
  • Pull the black tape off.

Aggiungi Commento

Unscrew the two screws underneath.
  • Unscrew the two screws underneath.

Aggiungi Commento

  • Remove lens

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Crista Riedy

Membro da: 12/02/2013

406 Reputazione

3 Guide realizzate

Team

Ohio State, Team 1-2, Buehl Spring 2013 Membro di Ohio State, Team 1-2, Buehl Spring 2013

OSU-BUEHL-S13S1G2

2 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 8

Tutti i Tempi: 499