Introduzione

You will learn how to remove the front panel of the Nerf gun. The front panel of the Furyfire is the piece that closes onto the other half of the gun to enclose the components and hold them in place. Knowing how to remove the front panel is required for you to be able to perform any other repairs on the Furyfire.

Parti

Nessuna parte richiesta.

Using a 00 Phillips screwdriver, remove all screws from the front panel. The screws have a length of .95 cm.
  • Using a 00 Phillips screwdriver, remove all screws from the front panel. The screws have a length of .95 cm.

Aggiungi Commento

After the screws have been removed, gently lift the panel from the gun and set it aside.
  • After the screws have been removed, gently lift the panel from the gun and set it aside.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team 11-2, Blackwell Fall 2014 Membro di USF Tampa, Team 11-2, Blackwell Fall 2014

USFT-BLACKWELL-F14S11G2

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 383