Introduzione

Disassembling top half to get to connector ribbon, inside screen, and speaker.

Pull at top of faceplate, and it will pop off.
  • Pull at top of faceplate, and it will pop off.

Aggiungi Commento

Unscrew four screws on front cover.
  • Unscrew four screws on front cover.

Aggiungi Commento

Slide out metallic silver cover.
  • Slide out metallic silver cover.

  • This piece is wedged in tight. Try to slide out one hook at a time, instead of both simultaneously.

Aggiungi Commento

Use a tool to wedge in between the silver and black parts on the cover.
  • Use a tool to wedge in between the silver and black parts on the cover.

  • Silver part should now snap off.

Aggiungi Commento

Black rubber part may now be easily removed.
  • Black rubber part may now be easily removed.

Aggiungi Commento

Use a soldering iron to disconnect the connector ribbon from the phone.
  • Use a soldering iron to disconnect the connector ribbon from the phone.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Tyler Knisley

Membro da: 07/05/2010

1 Reputazione

14 Guide realizzate

Team

Cal Poly, Team 6-16, Maness Spring 2010 Membro di Cal Poly, Team 6-16, Maness Spring 2010

CPSU-MANESS-S10S6G16

4 Membri

14 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,509