Parti

Nessuna parte richiesta.

First be sure to turn the power switch to the off position.
  • First be sure to turn the power switch to the off position.

  • Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

Aggiungi Commento

Now remove the battery. On the back of the device locate the battery cover. Remove it by pushing down on the clip.
  • Now remove the battery.

  • On the back of the device locate the battery cover.

  • Remove it by pushing down on the clip.

  • Then pull the piece of fabric until the battery comes out.

Aggiungi Commento

Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners. Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.
  • Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

  • Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

Aggiungi Commento

Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.
  • Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 10

Tutti i Tempi: 1,010