Introduzione

The plastic edge cover needs to be removed to get to some components.

Parti

Nessuna parte richiesta.

Unscrew the 20 Phillips screws on the underside of the T42.
  • Unscrew the 20 Phillips screws on the underside of the T42.

    • For ease of reassembly, keep your screws organized.

Aggiungi Commento

Unscrew the 2 Phillips screws on both sides of the T42's rear.
  • Unscrew the 2 Phillips screws on both sides of the T42's rear.

leave these four screws alone. No need to remove them.

fredwb - Replica

Of course you need to remove them you Dingbat! They are the main anchors of the screen hinges, Doh!

wbcam -

There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

The dark red circles are not very easy to see. How about white ones?

mattikaki - Replica

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Flip the laptop over and open the screen.
  • Flip the laptop over and open the screen.

    • The bezel and keyboard will be loose, be careful.

Aggiungi Commento

Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together. Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.
  • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

    • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Aggiungi Commento

Starting from the bottom right, carefully remove off the bezel. Use a spudger or flat head screwdriver if needed. Starting from the bottom right, carefully remove off the bezel. Use a spudger or flat head screwdriver if needed.
  • Starting from the bottom right, carefully remove off the bezel. Use a spudger or flat head screwdriver if needed.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Gerald Watanabe

Membro da: 14/04/2010

180 Reputazione

14 Guide realizzate

Team

Cal Poly, Team 29-76, Johann Spring 2010 Membro di Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 Membri

30 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 6,538