Introduzione

This guide will show you how to remove the hard drive from your HP Compaq dx2000MT

Turn off your computer and remove the power cable by pulling it straight out of its socket.
  • Turn off your computer and remove the power cable by pulling it straight out of its socket.

Aggiungi Commento

Remove the 2 Phillips #2 screws that secure the case door to the device. Remove the 2 Phillips #2 screws that secure the case door to the device.
  • Remove the 2 Phillips #2 screws that secure the case door to the device.

Aggiungi Commento

Remove the side case door by pushing towards the rear of the device with your hand. This may take considerable force so keep pushing! Once you slide the door back, remove it by pulling it outwards from the device.
  • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

  • Once you slide the door back, remove it by pulling it outwards from the device.

Aggiungi Commento

Remove the side case door by pushing towards the rear of the device with your hand. Once again, this may take considerable force. Once you slide the door back, remove it by pulling it outwards from the device.
  • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

  • Once you slide the door back, remove it by pulling it outwards from the device.

Aggiungi Commento

Remove the IDE data and power cables from the hard drive Remove the IDE data and power cables from the hard drive Remove the IDE data and power cables from the hard drive
  • Remove the IDE data and power cables from the hard drive

Aggiungi Commento

Remove the front bezel by pulling upwards and out from below the lowest air vent. Remove the front bezel by pulling upwards and out from below the lowest air vent. Remove the front bezel by pulling upwards and out from below the lowest air vent.
  • Remove the front bezel by pulling upwards and out from below the lowest air vent.

Aggiungi Commento

Remove the external drive faceplate by removing the 2 Torx T15 Screws Remove the external drive faceplate by removing the 2 Torx T15 Screws Remove the external drive faceplate by removing the 2 Torx T15 Screws
  • Remove the external drive faceplate by removing the 2 Torx T15 Screws

Aggiungi Commento

Remove the following screws: Front Torx T15.
  • Remove the following screws:

    • Front Torx T15.

    • Torx T15 mounting the hard drive cage to the optical drive bay.

Aggiungi Commento

Fully remove the hard drive cage by sliding it towards the back of the device and pulling down. Fully remove the hard drive cage by sliding it towards the back of the device and pulling down. Fully remove the hard drive cage by sliding it towards the back of the device and pulling down.
  • Fully remove the hard drive cage by sliding it towards the back of the device and pulling down.

Aggiungi Commento

Remove 2 Torx T15 screws holding this side of the hard drive in place Remove 2 Torx T15 screws holding this side of the hard drive in place Remove 2 Torx T15 screws holding this side of the hard drive in place
  • Remove 2 Torx T15 screws holding this side of the hard drive in place

Aggiungi Commento

Proceed to the other side of the hard drive cage Remove 2 Torx T15 screws holding this side of the hard drive in place Remove 2 Torx T15 screws holding this side of the hard drive in place
  • Proceed to the other side of the hard drive cage

  • Remove 2 Torx T15 screws holding this side of the hard drive in place

Aggiungi Commento

Remove the hard drive from the hard drive cage by pulling it outward from the cage Remove the hard drive from the hard drive cage by pulling it outward from the cage
  • Remove the hard drive from the hard drive cage by pulling it outward from the cage

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Eva Pong

Membro da: 22/09/2011

101 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 17-16, Regan Fall 2011 Membro di Cal Poly, Team 17-16, Regan Fall 2011

CPSU-REGAN-F11S17G16

4 Membri

17 Guide realizzate

can i upgrade it to 500gb?

connor gouws - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 18

Ultimi 30 Giorni: 30

Tutti i Tempi: 5,255