Introduzione

The LCD screen cover is necessary for protection of the actual LCD screen. In order for the removal of the LCD screen various prerequisite steps are required including the removal of the side panels, and the central button.

Parti

Nessuna parte richiesta.

Use the plastic opening tool.
  • Use the plastic opening tool.

  • Lodge the tip into the corner of the device; Applying pressure upward, allowing the panel to be released.

Aggiungi Commento

The side panel can now be detached using your fingers. The buttons can be dislodged by turning the panel over and shaking it, if necessary. The buttons can be dislodged by turning the panel over and shaking it, if necessary.
  • The side panel can now be detached using your fingers.

  • The buttons can be dislodged by turning the panel over and shaking it, if necessary.

Aggiungi Commento

Lodge the tip of the plastic opening tool into the top arc of the front panel. Apply a little force to cause the panel to detach.
  • Lodge the tip of the plastic opening tool into the top arc of the front panel. Apply a little force to cause the panel to detach.

Aggiungi Commento

Slide the blue opening tool along the seam applying force to continue detaching the side panel. Remove the button from the side panel. Remove the button from the side panel.
  • Slide the blue opening tool along the seam applying force to continue detaching the side panel.

  • Remove the button from the side panel.

Aggiungi Commento

The central button can easily be removed by using your fingers or tweezers to push the button out towards the left panel. The central button can easily be removed by using your fingers or tweezers to push the button out towards the left panel.
  • The central button can easily be removed by using your fingers or tweezers to push the button out towards the left panel.

Aggiungi Commento

Carefully remove the circuit board/LCD component from the device by pulling it towards the left open panel. Carefully remove the circuit board/LCD component from the device by pulling it towards the left open panel.
  • Carefully remove the circuit board/LCD component from the device by pulling it towards the left open panel.

Aggiungi Commento

The screen cover can be easily lifted and removed from the LCD screen.
  • The screen cover can be easily lifted and removed from the LCD screen.

Aggiungi Commento

Conclusione

After disassembly, the device components should look similar to that which is depicted in the cover image (top right of page).

Alexander

Membro da: 09/03/2012

101 Reputazione

9 Guide realizzate

Team

Clemson, Team 15-3, Benson Spring 2012 Membro di Clemson, Team 15-3, Benson Spring 2012

CLEM-BENSON-S12S15G3

3 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 776