Introduzione

This guide explains how to disassemble the Breville BKC600XL coffee brewer head.

Parti

Nessuna parte richiesta.

Remove the two 12mm black Phillips screws using a Phillips #0 screwdriver. Reminder for reassembly; This bottom piece is first to be screwed back on. Reminder for reassembly; This bottom piece is first to be screwed back on.
  • Remove the two 12mm black Phillips screws using a Phillips #0 screwdriver.

  • Reminder for reassembly; This bottom piece is first to be screwed back on.

Aggiungi Commento

Remove the two 12mm Phillips screws using a Phillips #0 screwdriver.
  • Remove the two 12mm Phillips screws using a Phillips #0 screwdriver.

Aggiungi Commento

Remove the grey plastic casing. Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver. Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver.
  • Remove the grey plastic casing.

  • Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Antonio

Membro da: 26/09/2012

73 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 1-3, Propen Fall 2012 Membro di Cal Poly, Team 1-3, Propen Fall 2012

CPSU-PROPEN-F12S1G3

4 Membri

6 Guide realizzate

Thanks so much for posting this! I was ready to throw my Breville out the window! Step three highlighted the closing mechanism and I was able to easily repair my machine!!

Thanks

acaltab - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 42

Tutti i Tempi: 2,628