Remove the battery by sliding the battery lock switch
  • Remove the battery by sliding the battery lock switch

Aggiungi Commento

Remove the lower panel of the laptop by loosening 10 screws. Note that the screws do no come out of the back panel.
  • Remove the lower panel of the laptop by loosening 10 screws. Note that the screws do no come out of the back panel.

Aggiungi Commento

Remove two screws which holds a smaller back panel covering only the heatsink
  • Remove two screws which holds a smaller back panel covering only the heatsink

Aggiungi Commento

Loosen the four screws on the heat sink for the CPU. Note that these screws don't come out. Now carefully lift the unit from holding the heat pipe.
  • Loosen the four screws on the heat sink for the CPU. Note that these screws don't come out.

  • Now carefully lift the unit from holding the heat pipe.

  • After the heat-pipe unit is removed, the power connector for the fan is accessible.

Aggiungi Commento

First remove the power connector for the CPU Fan. Now remove the two screws connecting the CPU Fan.
  • First remove the power connector for the CPU Fan.

  • Now remove the two screws connecting the CPU Fan.

  • Slowly slide the CPU Fan upwards. It would be a little tight around the edges.

Aggiungi Commento

Unpack the new fan. Make sure the power wires are fixed in the hook provided.
  • Unpack the new fan. Make sure the power wires are fixed in the hook provided.

Aggiungi Commento

  • Follow all step backwards and finish.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Paras Tolani

Membro da: 01/03/2013

188 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 11

Tutti i Tempi: 2,129