Parti

Nessuna parte richiesta.

Pay special attention to where the DC power cables are plugged in so that they can be replaced the same way.
  • Pay special attention to where the DC power cables are plugged in so that they can be replaced the same way.

  • You may need to remove the heat-sink assembly in order to detach certain cables.

Aggiungi Commento

Remove the four screws on the back of the power supply using a standard Phillips-head screwdriver.
  • Remove the four screws on the back of the power supply using a standard Phillips-head screwdriver.

Aggiungi Commento

Press the secure tab down and slide the power supply out of its bracket to remove it.
  • Press the secure tab down and slide the power supply out of its bracket to remove it.

Aggiungi Commento

Slide the power supply into the empty bracket. It will click into place.
  • Slide the power supply into the empty bracket. It will click into place.

  • Replace the four screws to secure the power supply to the computer case.

Aggiungi Commento

Remember to use the case's secure tabs to hold cables out of the way.
  • Remember to use the case's secure tabs to hold cables out of the way.

  • If you removed the heat-sink assembly in order to remove any power supply cables, be sure to re-install the assembly.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 58

Tutti i Tempi: 4,974