Aggiusta la tua roba Comunità Store

Dell Latitude 9510 USB and Headphone Jack Replacement

Introduzione

This is a Headphone Jack replacement guide for a Dell Latitude 9510 USB. Ensure the jack is fully inoperable before replacement. To replace jack, follow steps below. Use caution to ensure no further damage to hardware.

Cosa ti serve

  1. Dell Latitude 9510 USB and Headphone Jack Replacement, Base Panel: passo 1, immagine 1 di 1

    • Flip the device so that the base plate is facing you.

    • Use a Phillips #0 screwdriver to remove the nine 5.5 mm screws securing the base plate.

    Traduci

  2. Dell Latitude 9510 USB and Headphone Jack Replacement: passo 2, immagine 1 di 1

    • Wedge a spudger between the base plate and the chassis, then gently pry around the entire perimeter to release the base plate.

    • Remove the base plate.

    Traduci

  3. Dell Latitude 9510 USB and Headphone Jack Replacement, Fan: passo 3, immagine 1 di 1

    • Use a Phillips #0 screwdriver to remove the two 3 mm screws securing the fan.

    Traduci

  4. Dell Latitude 9510 USB and Headphone Jack Replacement: passo 4, immagine 1 di 1

    • Place your fingernails behind the plastic tabs on the speaker's motherboard connector, then pull directly backwards, toward the wires, until the connector releases from its port.

    • Lift the fan up and out.

    Traduci

  5. Dell Latitude 9510 USB and Headphone Jack Replacement, Speakers: passo 5, immagine 1 di 1

    • Use a Phillips #0 screwdriver to remove the four 2 mm screws from the speakers.

    Traduci

  6. Dell Latitude 9510 USB and Headphone Jack Replacement: passo 6, immagine 1 di 1

    • Use a spudger to gently lever the speaker connector out of its port.

    • Lift the speakers up and out.

    Traduci

  7. Dell Latitude 9510 USB and Headphone Jack Replacement, USB and Headphone Jack Replacement: passo 7, immagine 1 di 1

    • Use a Phillips #0 screwdriver to remove the four 3.5 mm screws.

    Traduci

  8. Dell Latitude 9510 USB and Headphone Jack Replacement: passo 8, immagine 1 di 1

    • Place your fingernails behind each of the plastic tabs on the plug, and pull directly backward until the connector releases.

    Traduci

  9. Dell Latitude 9510 USB and Headphone Jack Replacement: passo 9, immagine 1 di 1

    • Flip up the locking bars on the two ZIF connectors so they stand vertically, then gently remove the two ribbon cables connected to the IO daughterboard.

    • Lift the IO daughterboard up and out.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 6 altri collaboratori

Matthew D

Membro da: 02/08/22

97 Reputazione

1 Guida realizzata

Distintivi: 2

Team

Western Carolina University, Team 1-5, Virtue Spring 2022 Membro di Western Carolina University, Team 1-5, Virtue Spring 2022

WCU-VIRTUE-S22S1G5

4 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 19

Tutti i Tempi: 192