Introduzione

This guide requires a Phillips #00 screwdriver

Parti

Nessuna parte richiesta.

Unplug the laptop from the power adapter and turn the power off. Failure to unplug laptop before proceeding could result in risk of electric shock! Failure to unplug laptop before proceeding could result in risk of electric shock!
  • Unplug the laptop from the power adapter and turn the power off.

  • Failure to unplug laptop before proceeding could result in risk of electric shock!

Aggiungi Commento

Slide the battery-lock tab and hold. Flip the battery away from the chassis to remove it. Flip the battery away from the chassis to remove it.
  • Slide the battery-lock tab and hold.

  • Flip the battery away from the chassis to remove it.

Aggiungi Commento

Undo the two screws on the fan cover plate labeled "F3", they will remain in the panel. These screws will remain in the panel Lift up on the side of the fan nearest the screws to release the fan module
  • Undo the two screws on the fan cover plate labeled "F3", they will remain in the panel.

  • These screws will remain in the panel

  • Lift up on the side of the fan nearest the screws to release the fan module

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

charlierefvem

Membro da: 11/01/2011

854 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 13-2, Forte Winter 2011 Membro di Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,857