Introduzione

This guide requires a Phillips #00 screwdriver

Parti

Nessuna parte richiesta.

Unplug the laptop from the power adapter and turn the power off. Failure to unplug laptop before proceeding could result in risk of electric shock! Failure to unplug laptop before proceeding could result in risk of electric shock!
  • Unplug the laptop from the power adapter and turn the power off.

  • Failure to unplug laptop before proceeding could result in risk of electric shock!

Aggiungi Commento

Slide the battery-lock tab and hold. Flip the battery away from the chassis to remove it. Flip the battery away from the chassis to remove it.
  • Slide the battery-lock tab and hold.

  • Flip the battery away from the chassis to remove it.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Undo the two screws on the fan cover labeled "F2" These screws will remain in the panel
  • Undo the two screws on the fan cover labeled "F2"

  • These screws will remain in the panel

  • Remove cover plate.

Aggiungi Commento

Remove the single 6mm screw holding the fan in place.
  • Remove the single 6mm screw holding the fan in place.

Aggiungi Commento

Flip the handle up. Use the handle to pull the fan away directly up, away from case.
  • Flip the handle up.

  • Use the handle to pull the fan away directly up, away from case.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

charlierefvem

Membro da: 11/01/2011

854 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 13-2, Forte Winter 2011 Membro di Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,072