Turn the laptop over to where the battery is facing upwards and towards you.
  • Turn the laptop over to where the battery is facing upwards and towards you.

  • Locate the release tabs located on either side of the battery.

  • Push the release tabs toward the center of the device.

  • Remove the battery.

Aggiungi Commento

Take the replacement battery, insert it into the original position  in the laptop.
  • Take the replacement battery, insert it into the original position in the laptop.

  • Slide the release tabs back into place.

Aggiungi Commento

Remove the two countersunk keyboard screws using the Phillips #00 screwdriver
  • Remove the two countersunk keyboard screws using the Phillips #00 screwdriver

  • Battery removal is not necessary for keyboard removal.

Aggiungi Commento

Lift up the keyboard using your fingers or a plastic opening tool
  • Lift up the keyboard using your fingers or a plastic opening tool

  • Do not not tear the ribbon cable hidden behind the keyboard

  • Disconnect the cable by sliding the connector ears outward

Aggiungi Commento

After removing the keyboard, use the plastic opening tools or other form of leverage to remove the rest of the silver casing
  • After removing the keyboard, use the plastic opening tools or other form of leverage to remove the rest of the silver casing

  • Depending on your model, there could still be some hidden screws on the bottom case of the laptop that hold the palm-rest in place.

Aggiungi Commento

Use a plastic opening tool to pry the silver portion front of the top away from the colored portion.
  • Use a plastic opening tool to pry the silver portion front of the top away from the colored portion.

Aggiungi Commento

There should be two small screws to the bottom corners of the speaker assembly, which can be found below the screen. Unscrew them.
  • There should be two small screws to the bottom corners of the speaker assembly, which can be found below the screen. Unscrew them.

  • NOTE: Keep track of where you put the screws after you remove them. Keep screws of the same size together and away from screws of different sizes.

Aggiungi Commento

There should be a cable coming off the speakers that connects to the base below the keyboard. It should easily slide out from here. Congratulations! You have successfully removed the speakers.
  • There should be a cable coming off the speakers that connects to the base below the keyboard. It should easily slide out from here. Congratulations! You have successfully removed the speakers.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Kyle Beekman

Membro da: 05/04/2012

141 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 14-10, Forte Spring 2012 Membro di Cal Poly, Team 14-10, Forte Spring 2012

CPSU-FORTE-S12S14G10

5 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,193